Your Position: Home > News > Industry News

Scanner needs to be driven?

2019/1/9      view:

Does the barcode scanner need to use a driver?

 

YHDAA (Shenzhen) Xiaobian often encounters a lot of friends on the Internet to ask for a barcode scanner driver or to ask about the driver of the barcode gun. It should be caused by the lack of popularity of this knowledge. Here is an explanation for everyone:

 

First of all, well-known scanner brands like symbol and honeywell are not driven, let alone other brands or domestic brands.

 

Secondly, the barcode scanner is plug-and-play. Sometimes it may encounter that the data cable is connected to the computer, but it is impossible to scan the data into the notebook or the software. Here, tell everyone that this is not the scanner. Problem, and there may be:

 

1. There is a problem with the data line;

 

2, there is an input method under the notebook, if any, please close and try to scan;

 

3, before the error settings have been caused, the factory settings can be restored.


In addition, if you are using a wireless scanner, after connecting the data cable, remember to scan the barcode on the corresponding base, so that the wireless Bluetooth transmission function can be realized.

 

Through the above analysis, everyone should have already understood that the barcode scanner is not driven. I hope that you will not waste time and put time on solving the problems encountered. If you still have problem with scanners, pls ask our sales service clerk freely.