YHD-M800D
- Brand: YHDAA
- Type: YHD-M800D
Features
* Mini Size: 2.1 *1.6 *1.7cm/ 0.82 *0.62 *0.66in.
* Plug and play, driver-free, convenient for usage.
* Supporting the RS232,USB,TTL,Micro USB interface.
* Scanner reads 2D & 1D barcodes printed on labels or displayed on device screens.
* Small size,easily to integrate into any device, especially for limit space application.
* Powerful decoding capacity for most 1D and 2D codes,can read incomplete and fuzzy codes.
* Support secondary development -- the serial port development instruction is complete to
satisfy each kind of host computer control interactive demand.
* Application fields: parcel locker,supermarket locker, ticket machine, self-service vending machine,
intelligent express cabinet, kiosk,locker, access control machine,self-service store, check-in machine,
bank counter machine, factory assembly line,logistics, hospital,PDA,etc.
* Can be customized according to customer demand.
Technical parameters
|
Product Specification |
YHD-M800D 2D CMOS Barcode Scanner Module |
|
Imaging Sensor |
CMOS |
|
Optical Source |
620nm Visible red light diode |
|
Trigger Mode |
Auto-sensing scanning |
|
Indication |
Buzzer & LED |
|
Resolution Ratio |
640×480 CMOS (300,000 pixel) |
|
Decoding Speed |
500times/second |
|
Interface |
RS232,USB,TTL,Micro USB |
|
Resolution |
4mil |
|
Minimum Contrast |
≥ 25% |
|
Decoding Capability |
1D: UPC/EAN,with complementary UPC/EAN,Code128,Code39, Code 39Full ASCII,Coda bar,industrial /Interleaved 2 of 5 Code93,MSI,Code11,ISBN,ISSN,China post,GS1 Databar,etc. 2D: PDF417 QR Aztec DataMatrix Maxicode MicroPDF417 etc |
|
Depth of field |
40-120mm Code 39(5MIL) 20-300mm EAN-13 (13MIL) 25-340mm Code 39(20MIL) 15-500mm Code 39(40MIL) 20-150mm PDF417(6.8MIL) 15-250mm QR Code(20MIL) |
|
Scan Angle |
Roll 360°, Pitch± 65°, Skew ±60° |
|
Current |
Max. : 212mA Working :156mA～212mA Stand-by : 156mA |
|
Working Voltage |
DC5/3.3 V ± 10% |
|
Storage Temperature |
-40°C ~ 70°C / -40°to 158°F |
|
Working Temperature |
-20°C ~ 60°C / -4°to 140°F |
|
Relative Humidity |
0 ~ 95% |
|
Weight |
3g (scanner without cable and development board) |
|
11g(scanner with cable and with development board) |
|
|
Dimensions |
21*16*17 mm (scanner without development board) |
|
44*33*11 mm (scanner with development board) |
|
|
Drop test |
1.5m fall to concrete |
|
Certificate |
CE,FCC,RoHS,IP54 |
|
Dimension Diagram |
12Pin Connection Diagram |
||
|
|
|
||
|
PIN |
OUT/IN |
Definition |
Ecplanation |
|
PIN 1 |
- |
NC |
Leave it or connect it to a low voltage. Do not connect to a high voltage |
|
PIN 2 |
PPWER |
VCC |
Input 3.3V, lower than 3.1V engine reset |
|
PIN 3 |
GROUND |
GND |
- |
|
PIN 4 |
IN |
RXD |
Serial port receiver signal |
|
PIN 5 |
OUT |
TXD |
Serial port transmitter signal |
|
PIN 6 |
IN |
D- |
USB port D- signal |
|
PIN 7 |
IN |
D+ |
USB port D+ signal |
|
PIN 8 |
- |
POWERDOWN |
Indicating the engine in the power saving mode |
|
PIN 9 |
OUT |
BEEP |
Passive buzzer output signal, idle low level |
|
PIN10 |
OUT |
LED |
Decoding success prompt light, idle low level |
|
PIN11 |
IN |
WAKE |
Weak pull-up, low-level wake-up engine |
|
PIN12 |
IN |
TRIG |
Weak pull-up,low-level trigger engine decoding |
